Setting Up Your Zotac Zbox - Zotac ZBOX E Series User Manual

ZOTAC ZBOX

Setting up your ZOTAC ZBOX

You need to connect peripherals before using your ZOTAC ZBOX.
6
6
1
2
1. Connecting to a network device
Connect one end of a Killer Ethernet cable to the LAN port on the system rear panel and the
other End to a hub or switch.
2. Connecting a WiFi antenna module
Connect a BT/WiFi antenna module to the BT/WiFi antenna connector.
3. Connecting to USB 3.1 devices
Connect USB 3.1 devices such as external hard drives, SSDs and flash drives to the USB 3.1
port on the system rear panel.
12
1
2
3
4
3
4
5
2
5