Setting up your ZOTAC ZBOX
You need to connect peripherals before using your ZOTAC ZBOX.
1
2
2
1. Connecting a WiFi antenna module
Connect a BT/WiFi antenna module to the BT/WiFi antenna connector.
2. Connecting to a network device
Connect one end of a network cable to the LAN port on the system rear panel and the other
End to a hub or switch. The LAN port marked with K is for Killer Ethernet.
3. Connecting to USB 3.1 devices
Connect USB 3.1 devices such as external hard disk drives, SSDs and flash drives to the USB
3.1 port on the system rear panel.
1
1
3
6
2
4
5
5
7
8
5
3
4
1
6
7
ZOTAC ZBOX
19