Table of Contents
Advertisement
Connections
S ' up
Step 1: Identifying
Your TV's Location
1.
If your country is highlighted,
press OK on the remote control.
If your countl T isn't highlighted,
press the up or down arrow button on ll]e
remote conlrol to highlight your countl T and press OK.
2.
Use ll]e number
buttons on your remote to enter your zip code.
Press OK when you're finished.
Note:
if your postal code contains
letters, press the up and down arrow buttons
on
your remote
to enter letters, and press the right arrow
button
to go to the next
space, The left arrow
button
moves you to the left.
Step
2: Configuring
for Cable
The next series of screens asks you about your cable setup. To supply your "IV
with the correct TV program listings, the GUIDE Plus+ system needs to know if
your "IV is connected
to cable.
1.
If your "IV is connected
to cable, highlight
Yes and press OK.
If your "IV isn't connected
to cable, highlight 51o and press OK (STEP 3:
Co*TfigurhTg,fi_r a VCR appears).
Go to page 18.
2.
If you have a cable box connected
to this TV, highlight
Yes and press OK on
your remote control.
Note: The next series of screens is very important because the GUIDE Plus+system
must find the correct cable box information in order to receive the correct TV
program listings,
If you don't
have
a cable
box connected
to this TV, highlight
No and
press
OK (STEP 3: ConfiguringfiJr
a VCR appears).
Go to page
18.
Tip
If you're nat sure which channel is the
cable box's output channel, consult the
book that came with your cable box or
contact your cable company.
16
Chapter1
Advertisement
Table of Contents
