Setting The Recording Duration Time; Checking/Changing/Cancelling Timer Settings; Recording Stereo And Bilingual Programmes - Sony SLV-SE220 Service Manual

ag
Setting the recording duration time
After you have started recording in the normal way, you can have the VCR stop
recording automatically after a specified duration.
Before you start...
* Refer to "Index to parts and controls" for button locations.
1 While recording, press @ REC.
The © indicator appears in the display window.
DED 1; — 7)
a FTA
Os efi Le Ju
2 Press @ REC repeatedly to set the duration time.
In SP mode
Each press advances the time in increments of 30 minutes.
0:30 —* 1:00 —----© 4:00 —» 4:30 —» Normal recording 7
In LP mode
Each press advances the time as shown below.
is 0:30 — 1:00 —----» 8:00 -» 9:00 -» Normal recording a
The tape counter decreases minute by minute to 0:00, then the VCR stops
recording and turns off automatically.
To extend the duration
Press @ REC repeatedly to set a new duration time.
To cancel the duration
Press @ REC repeatedly until the © indicator disappears and the VCR
returns to the normal recording mode.
To stop recording
To stop the VCR while recording, press & (stop).
Note
+ You cannot display the current tape time in the display window when setting the
recording duration time.
60 | Setting the recording duration time
When the timer settings overlap
The programme that starts first has priority and the second programme starts
recording only after the first programme has finished. If the programmes
start at the same time, the programme listed first in the menu has priority.
Programme about 20 seconds
i ae EPR
wil be cut off
Programme 1
Programme 2
about 20 seconds will be cut off
62 | Checking/changing/cancetting timer settings
a TS YT
Checking/changing/cancelling timer
settings
Before you start...
+ Tum on your TV and set it to the video channel.
+ Refer to "Index to parts and controls" for button Jocations.
1 Press VC) to tum on the VCR.
Press MENU, then press /§ to highlight TIMER PROGRAMMING
and press OK.
* If you want to change or cancel a am
setting, go on to the next step. TR DAY START ASTOR VP =
* If you do not need to change or cancel SASS AUR COG 2 Os 20x ee =
the settings. press MENU. then tum SA 6 12 9
a == s
off the VCR to return to recording, - -- »
standby. eek °
SELECT :a¥ SET 3
END. OK EXIT 3
cy
Press /# to select the setting you want 3
to change or cancel, then press =.
The PR number on the selected row
flashes.
SET :@
EXIT: MENU
* To change the setting. press 4=/> to select the item you want to
change. then press #/$ to reset it.
* To cancel the setting, press CLEAR.
5} Press MENU to exit the menu.
Hf any settings remain, tum off the VCR to retum to recording standby.
CONKIMUOC ewwernrasmananies
Checking/changing/canceliing timer settings | 61
SSS a ETE EET)
Recording stereo and bilingual
programmes (not available on SLV-SE420K)
In the ZWEITON (German stereo) system
This VCR automatically receives and records stereo and bilingual
programmes based on the ZWEITON system. When a sterco or bilingual
programme ts received, the STEREO indicator appears in the display
window.
To select bilingual sound while recording
Press AUDIO MONITOR to select the sound you want. ee
To listen to On-screen display Display window >
Main MAIN STEREO é
Sub SUB STEREO Hl
Main and sub MAIN/SUB STEREO
Standard sound* MONO STEREO H
* Usually the main channel heard trom both the left and right in bilingual 3
Programmes
To select stereo programme while recording
a
Te ten to On-screen display Display window
Stereo STEREO STEREO.
Left channel LCH STEREO
Right channel RCH STEREO
Standard sound LCH + RCH STEREO
* Usually the mixed sound of left and right channels in stereo programmes
Continued wae
Recording stereo and bilingual programmes (not avaitable on SLV-SE420K) | 63
1-15