Table of Contents
Advertisement
Editing
Connecting to a VCR or stereo system
How to connect to record on this VCR
Connect the line outputs of the other VCR to the input connector of this
VCR.
Reter to the examples A through C and choose the connection that
best suits your VCR.
WV
Your VCR {Recorder}
LINE-1 (EURO AV}
Other VCR (Player)
Pag
EEE,
2 Leto
t
— —
Scart
(EUROWAV) 0,
VMC-2121HG Scart cable (not supplied)
To: Signal flow
Example B (SLV-SE820N only)
Your VCR (Recorder)
WV
DU LINE-2L-)R
(open cover to connect}
ones]
VMC-820HG audio/video cable (not supplied)
Other VCR (Player)
coh: Signal flow
72 | Connecting to a VCR or stereo system
Basic editing
When recording on this VCR
Before you start editing
* Turn on your TV and set it to the video
channc)
¢ Press INPUT SELECT to display the
connected line in the display window.
* Press SP/LP to select the tape speed, SP or LP.
1 Insert a source tape with its safety tab removed into the other (playback)
VCR.
Search for the point to start playback and set it to playback pause.
Insert a tape with its safety tab in place into this recording) VCR.
Search tor the point to start recording and press @f (pause) to set it to
playback pause.
3 Press REC @ on this VCR to set it to recording pause.
To start editing, press the 89 (pause) buttons on both VCRs at the same
time.
To stop editing
Press the
(stop) buttons on both VCRs.
Tip
* To cut out unwanted scenes while editing, press #8 (pause) on this VCR when an
unwanted scene begins. When it ends, press Bf (pause) again to resume recording.
74 | Basic editing
1-18
Vv
Your VCR (Recorder)
LINE-3 (DEC/EXT)*' or
LINE-2 (DEC/EXT)"?
Other VCR (Player)
Scart
(BURS-AV)
VMC-2121HG Scart cable (not supplied)
c\.: signal tow
How to connect to a stereo system (SLV-SE820N only)
Connect the 2 LINE-2L
° R jacks on this VER to the audio output jacks
on the stereo system, using the RK-C510HG audio cable (not supplied).
Notes
+ Make sure you connect the plugs to jacks of the same colour.
© Ifthe other VCR is a monaural type. eave the red plugs unconnected.
If you connect duis VCR
to both the LINE
IN and LENE OUT
jacks of the other
VCR. select the input correctly to prevent a humming noise.
If the other VOR does not have a Seart (EURO-AV) connector. use the VMC-
2106HG cable instead and connect the cable to the line out jacks of the other VCR.
¢ When you connect another VCR to the LINE-3 (DEC/EXT)"! or LINE-2 (DEC/
EXT)** connector. press INPUT SELECT to display "L3"*! or "L2"*? in the
display window
.
© SLV-SE820N only
*? SLV-SE720N, SX720N and SE420K only
Bunip3
Connecting to a VCR or stereo aysiem | 73,
a
*F
___e
Audio dubbing (SLV-SE820N only)
This feature lets vou record over the normal
audio track.
The monaural sound previously
recorded 1s replaced while the onginal bs-ti
sound remains unchanged.
Use this feature
to add commentary to a tape that you have
recorded with a camcorder.
AUDIO DUB
Before you start...
* Open the =: LINE-2 L -® R jacks cover on the
front panel und connect a playback source.
* Tum on the TV and set it to the video channel.
DLINEZL-OR
"
Insert a source tape into your stereo system (or the plavhack VCR).
Search tor the point to start playback and set it to playback pause
2 Insert a prerecorded tape with its safety tab in place into this (recording)
VCR.
Search for the start of the section to be replaced and press
18 (pause).
The VCR enters pause mode.
3 Press AUDIO DUB.
"A_DUB" and the ~: indicator appears in the display window,
To start editing. press the HB (pause) buttons on this VCR and the stereo
system (or other VCR}
at the same time.
After you use this feature, the audio in playback mode is automatically
set to monaural.
To stop editing
Press M (stop) on this VCR and the stereo system (or other VCR).
m
a
=
é
Audio dubbing (SLV-SE820N only) | 75
Hide quick links:
Advertisement
Chapters
Table of Contents
