Setting The Recording Duration Time - Sony SLV-ED100ME Operating Instructions Manual

Setting the
recording
duration time
After recording is started in the normal
way, you can have the VCR stop
recording automatically after a specified
duration.
1
While recording, press r REC.
The TIMER REC indicator on the VCR lights up.
2
Press r REC repeatedly to set the duration.
Each press advances the time in increments of 30 minutes.
The tape counter decreases minute by minute to 0:00, then the VCR
stops recording and turns off automatically.
To extend the duration
Press r REC repeatedly to set to the new duration.
To cancel the duration
Press r REC repeatedly until the TIMER REC indicator lights off and the
VCR returns to normal recording mode.
To stop recording
To stop the VCR while recording, press p STOP.
Note
• You cannot display the current tape time in the display window when setting the
recording duration.
APC
SP
0:30 1:00
Normal recording
5:30 6:00
Additional Operations
r REC
59