Advertisement
Connecting two VCRs
This connection allows you to record (dub/edit) fiom one VCR
("VCRI" in the illustration below) to a second VCR ("VCR2")
while watching a videotape.
You will need:
• coaxial cable
• standard A/V cables
Note: Do not connect the same VCR to the output and input
jacks on the monitor at the same time. To dub or edit, VCR 2
must select LINE IN, and the monitor must select Video I.
From antenna
Steree VCR 1 {plays)
The unauthorized
recording, use, distribution,
or revision of
television programs, videotapes,
DVDs, and other materials is
prohibited under the Copyright Law and may subject you to
civil and criminal liability.
Connecting a camcorder
You will need:
• standard
A/V cables
- For better picture performance,
if your camcorder has
S-video, connect an S-video cable (plus the audio cables)
to VIDEO-2 on the monitor's side panel.
Camcerder
VIDEO-2 inputs en
monitor's right side panel
To view the camcorder
video:
Select the Video 2 video input source on the monitor.*
".:Toselect the video input source, press _)
on the remote control
(_
page 25). To program the monitor's remote control to operate
other devices, see "Using the remote control to operate your other
devices" on page 18.
13
Advertisement
