Advertisement
3
Press • or • to select the desired gray level (1,2 or 3), as
follows:
1 : Black
2: Dark gray
3: Light gray
Selectingthe cinemamode
(480i signalsonly)
When you view a DVD (480i signal; 3:2 pulldown
processed)
from a DVD player connected
to the VIDEO-l,
VIDEO-2,
ColorStream
HD-1/HD-2
(component
video), or HDMI
inputs on the monitor,
smoother
motion can be obtained
by
setting the Cinema
Mode to Film.
To set the Cinema
Mode to Film:
SS
MENU
Press
© and open the Picture
menu.
2
Press • or • to highlight
Cinema
Mode.
3
Press •or•
to select Film.
To set the Cinema
Mode to Video:
Select Video in step 3 above.
Adjustingthe picture
Selecting the picture mode
You can select your desired picture settings from four different
modes, as described
below.
Sports
Bright and dynamic
picture (ti_ctory setting)
Standard
Standard
picture settings
(fi_ctory setting)
Lower contrast
for darkened
room (tiLctory
Movie
setting)
Preference
Your personal
preferences
To select the picture mode:
N_
PlC
MODE
Pre,;s
©
on the remote
control.
The following
popup menu appears
on-screen.
Repeatedly
press P_O©MODE
or •/1_ to cycle among the modes.
To select the picture
mode using the menu system:
SS
MENU
Pre,;s
o
and open the Picture
menu.
2
Press • or • to highlight
Mode.
Picture
Settings
Cinema
Mode
3
Press • or •
to select the mode you prefer.
Note:
• The picture mode you select affects the current input
only. You can select a different picture mode for each
inpuL
• If you select one of the factory-setpicture
modes
(Sports,
Standard,
or Movie) and then change a
picture quality setting (for example, increase the
contrast or change the color temperature),
the picture
mode automatically changes to Preference
in the
Picture menu.
29
Advertisement
