Connecting The Touch Screen (Td-U852Ts Only); Touch Usb Cable Connection - Toshiba TD-U852 User Manual

Connecting the Touch Screen (TD-U852TS Only)

Touch USB Cable Connection

1. Connect the signal cable with display, and then turn on the display.
2. Connect the USB cable with the display and PC; connect one side of USB cable (Type-B USB connector)
on the display side.
3. Connect the other side of USB cable (Type-A USB) to the USB port on PC. See picture below.
4. Then turn on the PC.
5. When USB cable connected, then wait for 5 seconds and the touch function is ready to go.
6. To use the touch function from the OPS module, change the source of touchscreen control to OPS in
Advanced Setup Menu.
35