Toshiba COLORSTREAM HD 26HLC56 Owner's Manual page 34

Using the StableSound® feature
The StableSound °_feature limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in
volume that often happens when a TV program switches to a
commercial).
_ ® To turn on the StableSound feature:
SS MENU
Pre.<_' © and open tile Audio menu.
2
Press • or • to highlight StableSound.
3
Press • or • to select On.
Bass
To turn off the StableSound feature:
Select Off in step 3 above.
Usingthe Locksmenu
Tile Locks menu includes tile V-Chip and New PIN Code
features. You can use these features after entering tile correct
PIN code.
Entering the PIN code
1
2
SS
MENU
Pre.;s © and open the Function menu.
Press • or • to highlight Locks and press @.
The PIN code entering menu appears.
• Blocking Reset status:
Set a new 4-digit code by pressing the Number buttons
(0-9).
• When the PIN code is already stored:
Press the Number buttons (0-9) to enter your 4-digit
PIN code.
If the wrong PIN code is entered, the message "Incorrect"
appears. Enter your code again, and then press @.
The Locks menu appears.
3
Highlight V-Chip and press @.
The V-Chip menu appears (ir_ page 35).
If you cannot remember your PIN code
RECALL
While the PIN code entering screen is displayed, press
©
four times within five seconds. The PIN code will be cleared
and you can enter a new PIN code.
34