Abilize Ranger Instruction Booklet page 16

4. Setup Mode (Unit Change) - Press
The user could quit the setup mode with the following conditions.
(1) Leave or
stored and return to normal speedometer mode.
Odometer:
1. Operation Feature - Use optical coupler to detect the signal and transfer to related distances.
2. Unit Switch -
3. ODO Mode -
Display range : 0~99999
When the total distance goes
to 99999km or 62149mile
(99999÷1.609mile), the digits
will be reset to zero "0".
TRIP Mode:
1. Operation Feature
0.0~999.9 When the distance goes to
999.9, the counter will stop.
2. Reset Mode (Rest TRIP to Zero) - Press
3. Quit Setup Mode - The user could quit the setup mode with the following conditions.
(1) Leave or
stored and return to normal TRIP mode.
Notice to Routine Maintenance for certain mileage
1. Display I for Routine Maintenance - The initial mileage of routine maintenance is 5000km
for 1 minute.
Time to display :
could be driven normally and the control
panel could be operated without any delay.
16
+
buttons alone for 15 seconds.
buttons alone for 15 seconds.
together for 3 seconds to enter setup mode. While
+ together for 3 seconds to enter setup mode.