Panasonic SC-AK90 Operating Instructions Manual page 23

Tape direction
[] Press DECK 2 _---OPEN, and then insert the
tape.
Close the holder by hand.
Tape direction i sautomatically set to"I_ %
Press REV MODE to select the reverse mode.
Every time you press the button;
=-_ -" )-+ C=")
t
__: One side is _corded, then recording stops auto-
matically.
_'v"), (=): Both sides(front s ide-+reverse s ide) are recorded,
thenrecording stops automatically.
[] Press CD.
_J Set CDs in the rack.
(See page 12.)
I_ Press DISC/TRACK to select the CD selection
mode.
(Theindicator i lluminates with a greencolor.)
[] Turn JOG to select the desired CD number.
_'_ While theCD numberisflashing (approx. 10seconds)
Press • REC/STOP to start recording
elf you selected (_-3 in step 2, the direction will automatically
change to "_3 when recording starts.
*The recording will proceed from the first track on the selected
CD.
To stop recording
eTo add a 4 second _llent interval before stopping.
PressII. The CD will stopautomatically too.
• To stoprecording withouta silent interval
Press • REC/STOP. The CD will stop automatically too.
To recordon reverse side
Before recording, Ioad a tape and change the tape direction as ex÷
plained here below.
1. Press TAPE DECK 1/2 and select tape deck 2.
2. Press • and immediately thereafter II. The tape direction w ill be
shown as "•".
To record from a specific point on a tape
Before recording, advance the tape to the point from where you want
to start recording.
I To record programmed tracks I
1. After step4,program thetrack you want (performs steps2-6 on
page 16).
2. Press • REC/STOP tostart r ecording.
II
i
]