Panasonic SC-AK90 Operating Instructions Manual page 21

J To fast-forward or rewind the tape J
Press _e_/_ or k._/_,_! in the stop mode.
Tape direction Torewind Tofast-forward
"1_" 1_/4-€ m._/_
"4" _,_/t,_,_ M4/4-4
To find the beginning of a program
(TIPS: Tape Program Sensor)
Press _t4/4-9 or )_/_,_1 during play.
Tape To play the current t_ne To play the next tune "
direction from the beginning from the beginning
"I_"
t_e/4,9 )._/_,d
The TPS function s earches for silent parts ofabout4 secondsinlength
which are normallyfound between tunes.As a x_sult, itmay not
function p roperly inthefollowing cases.
sWith shortsilent parts
• "vVhen noise occurs betw_n tunes
• With silent partsfound withintunes
Type
tape
can correctly 1
of which be
recorded
The system automatically identifies the type of tape.
NORMAL POSITION/TYPE I O
HIGH POSITION/TYPE II O
METAL POSITION/TYPE IV x
This system cannot correctly make a recording or erasing, if metal
position tapes are used.
I To record from the beginning of the tape I
You cannot record on the leader part of the tape. Before recording,
wind the tape past the leader to a pcYmtwhere recording can start
immediately.
Recordingpart --
Leader tape
(no recording can be made)
How volume, sound quallty/field, super
woofer and V. BASS effect recording
The tape you are recording is not affected whatsoever by changes
in volume, sound quality/field, super woofer (SC-AK90/SC-AK91)
or V. BASS (SC-AK70/SC-AK71).
• In recording, sound quality/field are set automatically to "FLAT".
• You can change volume, super woofer and V. BASS effect for the
playback sound.
To erase a recorded sound I
1. P_ss TAPE DECK I/2.
2. insert the recorded tape into deck 2.
3. Press REV MODE to select reverse mode.
4. Press 0 REC/STOP.
eyou cannot open the deck 1 while ix,cording,
• You cannot fast-forward or rewind one deck while recording with
the other.
|
I
8
U,