Panasonic SC-AK90 Operating Instructions Manual page 17

Indicates program mode
oOOO
_NCEL
_OQQQ
To cancel program play mode
PressPROGRAM in the stop mode.
Programmed contents will be saved in memory.
Pressing • will cancel program play, and it will also erase the entire
program.
To select a two-digit track
Press ->10and then the two numbers you want.
For example
Track no. 2(3:_>10---,2--,0
Track no. 35:->10_,3_5
When "CD FULL" appears []
The number of programmed tracks is lindted to 24. No further tracks
can be programmed.
You can do the following during program mode []
eCheck program contents.
Press I.<4/.<-_ or IH_/IH,-I in the stop mode.
Everytime you press one of the buttons, the track and program No.
are shown on the display.
eAdd to the program.
In stop mode, repeat steps 3 through 5 on page 16.
eCancel entries. []
From the last
programmed
track
A specified track
only
Press CANCEL.
Select the track with I_/-_< or
1_/1_,4, and press CANCEL within
3 seconds.
Press 1.
An tracks
Memory retention
Your program is retained in memory for about 2 weeks while the
system is unplugged.
To replay your program
If you tvJ'ned OFF your program with PROGRAM, you can play it
again as explained below.
1. Press PROGRAM.
2. Press I_.
II
I
e
If you program a track not on your CDs
The track is initially programmed, but during
program play, the
changer will skip that track and will continue playing from the next
programmed item.