Panasonic SC-AK90 Operating Instructions Manual page 16

h ,... ...Ir_l_l_
|
i
0
Specified track number
Program order
%
• Everyone has his/her favorite tracks. You can program the changer
to play them in a specific order. With this changer, you can make
one program and fill it with up to 24 selections from any of the CDs
in the rack.
eYou can also program a certain track during playback•
(See "Direct programming" below.)
iT Press CD.
_'_ [Inthe stop model
Press PROGRAM.
[] Press DISC.
[]
While "--" is flashing (approx. 10 seconds)
Select the CD(s) you want with the numeric
buttons.
You cad select slotNo. O,
"SINGLE" appears on the display.
[] Press the numeric button(s) to select the de-
sired track.
[] Repeat steps 3 through 5 until you have pro-
grammed all the tracks you want.
[]
P_s_S'lls_tart in theprogrammed sequence.
If, while listening to a certain track, you decide that you want to
program that track to your program, you can with direct program-
ming.
[While the track you want to program is piaying]
Press DIRECT PRGM.
The display wilI return to the original indica_on after about 3 sec-
onds.
When you make a program as explained under "Program play"
above, and then perform this procedure without clearing the pro-
gram first, the selected track is added to the end of the program..
To listen to programmed tracks, press PROGRAM and check
"PRGM" appears on the display, then press I_.
DuriNgprogram play, the DIRECT PRGMbutton does not operate.
(Continued on next page)