Panasonic SC-AK90 Operating Instructions Manual page 12

|
i
8
You can set CDs m the rack and remove them too, while playing CDs.
I How to set CDs
1.
Open
the rack
panel.
Except when _g or removing CI_, keep hands out of the changer
while open. You could injure yourself if somehow entangled in the
internal mechanism.
2. Slide the loader carriage to the slot you want.
The loader carnage has a LOCK position (when the leveris
down) and a RELEASE position ( when thelever isup).When you
slide theloadercarriage t oselect t heslot you want, make sureit
is intheRELEASE position ( when thelever isup).
You can readthenumbers between theprongs asshown below.
Slot
number
3•
4.
•Loader carriage
I Slot No. 0 (SINGLE) is reserved for CD [
single
play (p. 15).
I
(_ Lower the lever on the loader carriage and set
the CD in the groove with the label facing to
the right.
(_ Raise the lever.
Label side
Raise the lever.
Close the rack panel gently.
You will heara catching sound when therackpanelcloses.
PX_SS on
centerpiece,
I How to CDs
remove
1. Open the rack panel.
2. Slide the loader carriage to the slot you want•
Do notslide the loader c arriage when the lever i s down.
3. Lower the end of the lever and then remove CDs.
How to know whut CD is in what slot ]
This system comes with a notebook-like b inder (liner n otesorga-
nizer) i nwhich you cankeep your CD liners. Therearealso adhesive
ntunbersforindicating slot numbers in thebinder. Thisisa conve-
nient way tokeep track ofwhat CD is inwhat slot.
Adhesive Pocket
Put two liners hack-to-beck inside eachpocket, asshown above.
Do notput CD cases in the binder.
To prevent damage ]
Always observethefollowing points.
• Never loadmore thanone CD inany givenslot.
• Do notuse 3"(8cm) CDs fitted withexpanderrings.
• Do notPot anything otherthanCDs inthechanger.
• Do notseta CD intheslot o ftheCD beingplayed (slot flashes).
#Sometimes therackpanelcannotbe opened whilea CD isplaying.
It isa question oftime. Insuch case, waituntil you can open it.
• Do notopen tharackpanelwhilethechangeris changingCDs.
• Do not use cleaning CDs or CDs which are badly warped or
cracked.
• Set the system on a fiat, level surface.
DO not set it on top of magazines, inclined surfaces, etc.
• Always unload all CDs before moving the system.
• Do notuse CDs with poorlyattached l abels orstickers.
Adhesive protrudingfrom underneath stickers or left over from
peeledoff stickers can causethesystemtomalfunction.
eDo notuse irregular shape CDs (heart-shape, octagonal, etc.).
x@ xQ