Table of Contents
Advertisement
4. Pull the bottom of the Cabinet Block forward and lift.
5. Remove the Fan Block (A, B, C).
(Refer to Removal of Fan)
6. Remove SU-Board and SD-Board.
(Refer to Removal of SU-Board and SD-Board)
7. Remove SC-Board.
(Refer to Removal of SC-Board)
8. Remove SS-Board.
(Refer to Removal of SS-Board)
9. Remove SS2-Board.
(Refer to Removal of SS2-Board)
10. Remove the Slot Block.
(Refer to Removal of Slot Block)
11. Remove the Speaker Terminal Block.
(Refer to Removal of H3-Board)
12. Remove the Speaker Block.
(Refer to Removal of Speaker Assy)
13. Remove the screws and then remove the HX-Board Sub
Metal.
14. Disconnect the connectors (A16, C24), and remove the
flexible cables from the connectors (C21, C31).
15. Remove the screws and then remove the A-Board Block.
• Note: when removing A-Board Block
Please remove A-Board after removing the tape of the
flexible cable stuck on the plasma display panel.
16. Disconnect the connectors (P52, P56, P58).
17. Remove 5 screws ( ).
18. Remove 1 screw ( ) and then remove P-Board (MAIN).
19. Remove the screws and then remove P-Board (SUS).
37
TH-65PB2E
Advertisement
Table of Contents
