Table of Contents
Advertisement
TH-65PB2E
Supplement 1: [The check of setting for malfunction of electronic pen]
[1] The check of whether the Touch Pen mode is set to ON in the setting of the display
It can be checked by OSD when the "Recall" button on the remote control is pressed on (Fig. 1) or a Touch Pen mode setting screen (Fig. 2).
Cautions
TOUCH-PEN MODE (The default of Touch Pen mode is [OFF])
When using contact-type Touch Pen: Set [TOUCH & REMOTE]
When using remote pointer: Set [TOUCH & REMOTE].
SLOT INPUT - NETWORK
Set "ON" or "OFF" for each input terminal.
It is OSD when the "Recall" key is pressed at the time of touch pen
mode, and displays it as [TOUCH-PEN: ON].
After carrying out the self check for initializing, or when a
A-Board is replaced,
(Fig.1) OSD of touch pen setting
:OSD is not displayed when selecting WHITEBOARD by
input change.
[3] The check of whether electronic pen is registered into the electronic pen adapter (pairing)
It judges by power LED of an electronic pen, and the OSD display at the time of pairing tool soft starting.
Indicators of electronic pen express the existence of the pairing information on an electronic pen adapter, and OSD of pairing
tool software expresses the existence of the pairing information on an electronic pen.
Pairing can be carried out when both pairing information is in agreement.
Easy WhiteBoard
Pairing Tool
: Cautions
When all the release is performed with a pairing tool using two or more pen, since pairing may not be made,
please check once again whether a character can be drawn by electronic pen after carrying out pairing.
or [TOUCH ONLY].
it is necessary to set Touch Pen mode to ON.
TOUCH-PEN
ON
Checking of power LED of electronic pen
(State of power LED)
Alternately blinks green and red
Lighting green
Checking of OSD of pairing tool software
(built-in TV)
TOUCH-PEN SETTINGS
TOUCH-PEN MODE
WHITEBOARD FUNCTION
QUICK WHITEBOARD LAUNCH
SLOT INPUT
VIDEO
COMPONENT
HDMI
DVI
PC
NETWORK
STANDBY PEN CHARGING MODE
PAIRING
PEN ADAPTER STATUS
(Fig. 2) Touch pen setting screen
Pairing
Panasonic WhiteBoard Software
(CD-ROM enclosure)
Pairing in progress
Set the electronic pen that you want to pair as pair-enabled
and then move it closer to the electronic pen adapter.
For details, refer to the procedure
for registering electronic pens in the operating instructions
for the electronic pen.
Cancel
Pairing Tool
Cancel
Unpairing All
Close
24
TOUCH & REMOTE
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
DETECTED
Pairing
Advertisement
Table of Contents
