Samsung HT-BD1255 Service Manual page 63

F/W Update by USB

1. Insert the USB on the rear panel.
2. Press Yes.
(If the USB you inserted has a later one than Current
Version)
4. Wait about 2~3 minutes.
5. When Finished, power automatically goes off.
4-2-3 Cold Start Method (Initialize Setup)
1. This is useful for forgotten Parental Lock password.
2. Press ►| on the front panel for over 5 seconds while
'no disc' status.
3. Then, VFD sign: 'COLD START'
4. System Micom Cold Start
: During Stand-By, just press
over 5 seconds. Then, Red LED will go out and go on.
Samsung Electronics
 on the front panel for
Verifying Firmware Version.
Do you want to update Firmware?
>Current Version : yymmdd.xx.XAA
>New Version : yymmdd_xx_HT-BD1250_XAA
Yes No
Firmware Update.
Now, Processing...
Please, do not turn off the power.
MENU LANGUAGE SELECTION
Press 1 for English
Pulsar 2 para Espanol
Touche 3 pour Francais
Macrovision : BBS41
Troubleshooting
4-37