Factory Defaults, Reboot, Firmware Update; Network Discovery For Windows 7 - DEVA Broadcast DB9000-RX Quick User Manual

STEP 12
The Factory Defaults page
except for Network and WEB server Settings which remain unchanged. On completion of the process the
settings should have the proper default values.
Hardware Reset
This process will fully restore DB9000-RX to its Factory Defaults, including the Network settings. To
start a Hardware Reset, disconnect the power supply cable from the unit. Then locate the RESET button
on Rear panel, press and hold it. Afterwards, connect the power supply cable to the unit and keep the
RESET button hold until the POWER led starts blinking. Release the RESET button and wait for DB9000-
RX to reboot with the factory default settings.
Rebooting
Firmware Update
STEP 13
1. Open Advanced sharing settings by clicking the Start button, and then on "Control Panel". In the
search box, type "network", click "Network and Sharing Center", and then, in the left panel click
"Change advanced sharing settings".
2. Select your current network profile.
3. Click Turn on network discovery, and then click Save changes. If you're prompted for an
administrator password or confirmation, type the password or provide confirmation.
4. To access the device open a new Explorer bar and click on Network . If you have successfully enabled
the network discovery option, the device will be displayed. Double click on DB9000-RX will open a
new WEB browser window.
NOTE: If you have already enabled this function on your computer just open a new Explorer bar and click
on Network. The device must be displayed. If not follow the instructions from Step 13.
Please refer to the User manual for detailed information on

Factory Defaults, Reboot, Firmware update

Network discovery for Windows 7

how to configure and explore your device.
To restore DB9000-RX to its Factory
Defaults you should first press the Restore
button. A new window will appear: confirm
that you want to restore factory defaults and
wait for the process to complete. All settings
will be restored to their factory defaults
To start Rebooting of DB9000-RX press the
Reboot button. A dialog warning window
will appear. Confirm that you want to reboot
the device and wait for the process to
complete.
To update the device firmware, please
select the new firmware file. Press the
Upload button. A dialog window will appear.
Confirm firmware update and wait for the
process to complete.