Network Configuration; Ip Audio Configuration - DEVA Broadcast DB9000-RX Quick User Manual

STEP 5
General Network Settings
If you prefer to use static settings please disable the DHCP and fill in the
information requested - IP Address, Netmask, Gateway, Primary and
Secondary DNS. Otherwise, enable the DHCP.
IP Voice Announcement
In order to avoid IP voice announcement during broadcasting we
recommend you to disable this function.
Web Server Settings
In order to enhance the security of DB9000-RX you can set new
username and password. A dialog box requesting your NEW username and
password may appear.
NOTE: If username and password fields are left blank, NO security is used.
FTP Server Settings
Specify the Command Port of the FTP server. Enter username and
password for the FTP server.
The FTP Server must be in Passive mode-maximum one connection at a
time.
SNMP Settings
Press the Download button to download the latest available DB9000-
RX SNMP MIB file. Then specify Agent ID, Agent Port, Community, Manager
IP and Manager Port.
Agent ID is used to identify the device among others when a SNMP
notification is send. Agent - enables/disables SNMP Agent.
STEP 6
Source Priority
DB9000-RX has one main and two backup audio sources. If the audio
signal of the main source disappear the device will switch to the first available
backup source.
When the main audio signal is recovered DB9000-RX will automatically
switch back to it. Depending on your needs the priority of the connections
should be specified.
RTP Audio Player
Choose a port and decoder.
Icecast Audio Player
Choose a port and decoder. The username and password are used to
secure the connection. Make sure to enter the same on both sides.
IP Audio Player
DB9000-RX has one main URL and two alternative Stream Audio
Sources URL2, URL3. Switching between streams is immediate on audio
loss. When current Stream is URL2 or URL3 and connection to URL1 is
restored there will be an instantaneous switch back to URL1.
If the server does NOT use Port 80 you should enter URL and Port of the
Encoder. For example 192.165.1.21:2100.
NOTE: The selected players' decoders must match the settings of the
encoder devices on the other side of the connection.
Analog Audio Output
Adjust the analog output level of the device.

Network Configuration

IP Audio Configuration