Table of Contents
Advertisement
Available languages
Available languages
WIELAND ST18/3 device plug system
SKII mit
Ausführung
Steuerphase
Anschluss
Kontakt-
1
2
T
T
Kennzeichung
L
PSt
Belegung
Kodierung
Buchse
Kodierung
Stecker
Note:
Depending on the configuration ordered, there is a pre-fitted
WIELAND plug (male) with brown/red coding on the LED
KIT and on the "PROFESSIONAL" / "PROFESSIONAL HP" ver-
sion, this is assigned with (L I PSt I N). With many standard
luminaires (usually in the SKI version), a device socket from
ADELS with white coding or a device socket from WIELAND
with black coding is fitted on the supply line and attached
to the central protective conductor connection. If no control
line exists or is to be used on the pole side, this white/black
socket (female) can be combined with the brown/red plug
on the LED KIT provided that the PSt conductor is disconnec-
ted from the plug on the LED KIT side. This should be clearly
marked on the WIELAND plug for inspections at a later date.
Alternatively, a WIELAND socket with red/brown coding can
be ordered as an accessory and fitted on the supply line in
place of the white socket, in which case the protective con-
ductor must not be attached! The PSt control input of the
LED KIT must never be connected with the protective
conductor.
In the "Basic" version, the central contact of the WIELAND
plug, which may be fitted on the LED KIT, is not assigned.
In this case, the supply line's socket can be connected just
as it is.
General safety notices
• Assembly/maintenance and work on the electrical sup-
ply may only be undertaken by an authorised electrician
(electrical installer, specialist) in accordance with recog-
nised electrical regulations.
• Access to the voltage supply should be closed off at all
times. Only authorised staff has access to the voltage
supply.
• When working on live parts, these must be de-energised
Hess GmbH Licht + Form
Lantwattenstrasse 22
78050 Villingen-Schwenningen
Germany
Tel. +49 7721 / 920-0
Fax +49 7721 / 920-250
info@hess.eu
www.hess.eu
4
SKII ohne
SKI ohne
Steuerphase
Steuerphase
3
L
N
L
S
N
L
N
L
and secured so that they cannot be switched back on
again by mistake.
• Check covers, seals, lamp sockets for cracks and wear
and replace with original spare parts if necessary.
N
PE
N
• Only use original parts for any repairs/maintenance.
Ensure that all protective devices are refitted.
• Should the luminaires be modified at a later date, the
company which undertakes these modifications is consi-
dered the manufacturer.
• The electrical equipment should be checked on a regular
basis. Loose and damaged cables must be replaced
immediately.
Warranty and liability
The "General terms and conditions of sale and delivery"
of Hess apply. There are no grounds for warranty and
liability claims if these can be traced back to one or more
of the following causes:
• Unintended use
• Improper assembly and/or use and resultant damage
• Failure to observe safety notices, specifications and
assembly instructions
• Structural modifications undertaken at a later date
• Operation with defective and/or non-functional safety or
protective equipment
• Interventions performed incorrectly
• Catastrophes, impact of external objects and force
majeure
Copyright
Hess retains all copyrights to the entire documentati-
on. No part of these documents may be reproduced,
duplicated or transmitted in any form without the express
written permission of Hess.
Further details from the manufacturer
For more information about the respective components,
assemblies and products, consult the documentation
provided by the relevant manufacturer.
Note
The diagrams provided in these assembly/operating
instructions, depict examples of variants and may
vary from your version.
Advertisement
Table of Contents
