Applying Touch-Up Paint - Huawei DBS3900 Installation Manual

DBS3900 (Ver.B)
Installation Guide
Figure 8-80 Sealing the cable holes of the base by using the baffle plates
(1) Baffle plate on the right
Step 2 Use fireproof clay to seal the cable holes of the base, as shown in
Figure 8-81 Sealing the cable holes of the base by using the fireproof clay
(1) Fireproof clay
Step 3 Tighten the screws on the front baffle plate of the base.
----End

8.8.2 Applying Touch-Up Paint

The paint on the surface is intact. If any paint is damaged, you must apply touch-up paint to
avoid erosion.
Issue 06 (2011-09-15)
NOTE
Fireproof clay can be used only for sealing the cable outlet hole in the base. It cannot be used for sealing
the cable outlet hole of the cabinet.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Outdoor Scenario with DC Power Supply (BBU Installed
(2) Baffle plate at the rear
(2) PVC corrugated pipe
in a +24 V DC APM30H)
(3) Baffle plate on the left
Figure 8-81.
284