Attaching The Hose - Bissell REVOLUTION HYDROSTEAM 3428 Series Manual

Cleaning with the Hose and Tool
Note: Only water and formula flows through hose and tool, not steam.

Attaching the Hose

1. Lift accessory hose door
on top of foot on the front
of machine. Flip door toward
machine to open.
2-in-1 Upholstery Tool
1. Switch between
Dry and Wet
settings and turn
machine ON.
Cleaning the 2-in-1 Upholstery Tool
1. Twist dirt cup to open.
Empty into a garbage bin.
2. Insert hose until it clicks into
place. Be sure colored hose
release clip is facing out, away
from machine.
Attach tool to end of hose.
Dry
Suction
Channel
2a. Dry Cleaning
Vacuum up debris from
carpet or upholstery.
2. Rinse dirt bin. Let dry
completely before reinstalling.
2b. Wet Cleaning
Hold down trigger to activate spray.
Release trigger and suction up the stain.
Wet
Suction
Channel
CONTINUED ON NEXT PAGE
BISSELL.com 7