Table of Contents
Advertisement
After-Cleaning Care (continued)
Using the Rinse and Storage Tray (select models)
A
B
1. There are 2 hooks on each
side of part A that hook under
part B. Press B down onto
A. The water cup (C) can be
stored on the side of the tray.
6-8s
4. With hose tool door open,
recline machine and press
power button to turn ON.
Run for 6-8 seconds to rinse
brush rolls.
Storing Your Machine
Once your cleaning is complete, make sure both the dirty and clean water tanks are emptied, rinsed
out, and dried before the next use. Wrap cord around cord wrap for storage. Store machine in a
protected, dry area.
10 BISSELL.com
C
2. Place machine on tray and
open hose door on foot.
5. Close the hose tool door to
extract water from the tray.
Repeat these steps 1-2 times to
rinse foam out of the system.
Press power button to turn
machine OFF.
3. Fill rinse cup with fresh tap
to the fill line printed on cup.
Pour water into tray as shown.
Advertisement
Table of Contents
