Bissell REVOLUTION HYDROSTEAM 3428 Series Manual page 5

Three Modes of Cleaning
Startup
• This appliance is primarily a carpet cleaner with a steam-cleaning feature.
• Remove any solids and use a dry vacuum cleaner over area before using your deep cleaner.
• To prevent damage to Berber-style carpets, avoid repeated strokes in the same area. Before
cleaning area rugs, check the manufacturer's tag and test an inconspicuous spot on the rug
for colorfastness. Do not use on silk or delicate rugs.
• Stay off carpet until dry.
1. Plug into a properly
grounded outlet.
Steam Pretreat Mode
Loosen tough stains before removing with SteamWash Max Clean mode.
motor will shut off in this mode.
1. Press 2. Press mode button
recline pedal on handle until
to recline Steam Pretreat icon is
machine. illuminated. The motor
will turn off and the brush
rolls will stop spinning.
Icon will blink until heater
is ready to make steam.
2. Press recline pedal to
r ecline machine.
3.
Pull trigger to release
steam
and move machine
forward and back over
stain for 20 seconds.
3. Press power button on
handle to turn ON. Water
heater will turn on. Machine
defaults to Steamwash Max
mode with brush rolls and
vacuum motor on. Icon on foot
will blink then turn solid when
heater is ready to make steam
(<60 seconds).
Brush rolls and vacuum
4. After steam pretreat,
press mode button
to clean the stain in
SteamWash Max mode.
CONTINUED ON NEXT PAGE
BISSELL.com 5