Table of Contents
Advertisement
Reverberation
occurs as a combi-
nation of numerous
reflected
sounds
that tend to linger
on after the original
sound.
The
KR~
3500
provides
a
selection of Reverb
Types so you can
obtain just the am-
bience
that
you
need
for
your
music.
The Drum buttons can be used to set the balance independently for both the Accompaniment Drums and
Manual Drums//Manual Sound Effects Parts.
From the Master Screen :
(1) Select the Drum Part for which the setting is to be changed.
With the indicators on both (MANUAL DRUMS ) and (MANUAL SOUND EFFECTS } off, the balance for
the Accompaniment Drums Part can be adjusted. With any one of the indicators lit, whether it be
MANUAL DRUMS } or (MANUAL SOUND EFFECTS |, the balance for the Manual Drums 7 Manual
Sound Effects Part can be adjusted.
@ Press the appropriate Drum button ((4.) or (7) in the Balance section to obtain the screen used to
set the Drum Balance.
(3) Using the Drum buttons (2) and (<7),
Balance and Mute can be set in the same manner as for the
Upper Part.
3. Adding Spaciousness to Sounds
Devices that add depth or modulation to a sound are called "effect units". The KR~3500 contains two digital
effect units; Reverb and Chorus.
a. Applying Reverberation
To add reverberation to sounds, turn on the Reverb effect. The effect will be applicd to all Parts.
omen REVERB mm
ON-OFF
TYPE
| The Reverb setting returns to the factory default setting each time the power is tumed ON.
Nica
60
Advertisement
Table of Contents
