Table of Contents
Advertisement
26 Filter pump control
26.3
Menu Filter pump
The configuration menu for filter pump contro
following icon:
The following settings are available:
Menu 5 "
5 "
Selection of operating mode:
• Inactive (Filter pump control not used)
• Filter pump off
• Normal mode
• Eco mode
• Increased mode
• Timer
#
"
Programming timers.
/
! !
#
Basic settings for filter pump control.
,
#
#
Settings to enable or block dosing in the different op
pump
-
6
#
Safety settings for filter pump control.
INFO
Allocation of relay switch outp
An operating mode can only be
allocated a relay switch outp
in the
-
26.3.1
Programmable timer
This menu provides 6 freely programm
for filter pump control.
The timer intervals are displayed in the men
manner with programmed weekdays and tim
pump's operating mode:
trol is called up with the
operating modes of the filter
tputs
be activated if you have
utput to it beforehand
menu.
.
mmable timer intervals
enu in an easy'to'follow
times and with the filter
The following settings are possible
ible for each of the 6 timer intervals:
Sub.menu '
. " 2
3
Filter pump mode
The desired
ed operating mode for this time interval:
• Normal m
mode
• Eco mode
ode
• Increased
sed mode
Days of the Week
Selection of o
of one or multiple weekdays on which the
timer interval
rval should be active.
If no weekda
day is activated, then the entire timer
interval is ina
inactive.
Switch'on time
Time at whic
hich switch'on occurs.
Switch'off time
Time at whic
hich switch'off occurs
26.3.2
Basic configuration
ion
The menu
is
is used to configure the basic settings
for a switch output. This is
is generally done only once during
commissioning.
The following settings are availabl
able:
Sub.menu /
! !
#
Filter pump control
>
$
interface
E8 % <
External switches
See &9
For
" 6 !
" only
Allocation of
See <
inputs and outputs
Only for < = 1 !
Configuration
See Configur
iguration E8 % <
E8 % <
26.3.2.1 Allocation of inputs a
s and outputs
For
" 6 !
" only:
This menu allocates the relay swit
witch outputs for filter pump control.
Sub.menu 1"" !
Relay output 'Filter
Relay switch
tch output for turning on the filter pump (for
pump on/off'
conventional
nal filter pumps or as main on/off switch for
variable filter
lter pumps).
Relay output
Relay switch
tch outputs for activating the various
'Normal mode'
operating mo
modes for variable filter pumps.
Note: Not all
all three operating modes have to be used.
Relay output
'Eco mode'
Relay output
'Increased mode'
For each relay switch output, the f
e following settings are available:
Setting
Description
on
None
The correspo
sponding function is not used.
OUT 1 [26]
Relay switch
tch output OUT 1 [terminal block 26]
OUT 2 [27]
Relay switch
tch output OUT 2 [terminal block 27]
OUT 3 [30]
Relay switch
tch output OUT 3 [terminal block 30]
OUT 4 [31]
Relay switch
tch output OUT 4 [terminal block 31]
pH+ [22]
Dosing relay
lay pH + [terminal block 22]
Can only be
be used
if no pH+ dos
dosage is used.
pH' [21]
Dosing relay
lay pH ' [terminal block 21]
Can only be
be used
if no pH' dos
osage is used.
Alarm [25]
Alarm relay [
y [terminal block 25]
Can only be
be used, if the alarm relay function has
been deactiv
ctivated in the <
$ F
$ F ( ).
) "
'
!
menu (
59
Advertisement
Table of Contents
