Table of Contents
Advertisement
25 Universal switch outputs (4x)
25.3
Configuration menu
The configuration menus for each individual sw
identically.
They are called up via the icons
INFO
Designation of universal switch
In all menus in which the uni
appear, the switch output design
be indicated (e.g. 0
The following settings are available:
Configuration menu for universal switch outputs
;
Entry of the freely selectable name (designation) for
(
#
Selection of operating mode:
• Inactive (Switch output not used)
• Off (Switch output used, but turned off)
• On
• Timer
'
!
Activate the switch output once for a specified switch
#
"
Programming timers.
/
! !
#
Basic settings for the switch output.
-
6
#
Safety settings for the switch output.
INFO
Allocation of a relay switch out
A universal switch output can on
have allocated a relay switch o
in the
-
25.3.1
Programmable timer
This menu provides 6 freely programmable ti
switch output.
The timer intervals are displayed in the men
manner with programmed weekdays and times:
l switch output are set up
itch outputs
universal switch outputs
signation you entered will
,
uts
for the switch output.
itch'on time.
output
only be activated if you
output to it beforehand
menu.
.
e timer intervals for each
enu in an easy'to'follow
es:
The following settings are possible
ible for each of the 6 time intervals:
Sub.menu '
. " 2
3
Weekdays
Selection of o
of one or multiple weekdays on which the
timer interval
rval should be active.
If no weekda
day is activated, then the entire timer
interval is ina
inactive.
Switch'on time
Time at whic
hich switch'on occurs.
Switch'off time
Time at whic
hich switch'off occurs
Interval operation
Activation of
of interval operation
(Periodic swi
switching on and off)
Switch'on interval
Switch'on du
duration for interval operation.
Switch'off interval
Switch'off du
f duration for interval operation.
25.3.2
Basic configuration
ion
The menu
is used to configure the basic settings
is
for a switch output. This is genera
erally done once upon placing a switch
output into operation.
The following settings are availabl
able:
Sub.menu /
! !
#
Relay output
Relay switch
tch output used for the universal switch
output.
Block if missing flow
Yes
Outpu
utput is turned off if flow signal is missing.
Blocking by filter
Yes
The o
e output is turned off depending on the
pump operation mode
operation mo
mode of the filter pump.
Prerequisite:
ite: PoolManager
Blocking by input.
Yes
The o
e output is turned off if the selected input is
in the state in
e indicated.
Blocking by another
Yes
The o
e output is turned off if the other output
output
selected is in
s in the state indicated.
External switch or
See &9
push button
INFO
Terminal block ind
indication
For the relay output
puts OUT1 ... OUT4, the terminal block
number is indicate
ated directly in the menu. This is the
number in brackets,
ets, e.g. [26] for OUT1.
INFO
Switch OUT4
The relay output O
t OUT4 is designed as a changeover
switch. When activ
tive (on), terminal block [31] is turned
on. When inactive (
e (off), terminal block [32] is turned on.
All other switch out
outputs are designed as simple on / off
switches.
®
controls the filter pump.
) " or
"8
55
Advertisement
Table of Contents
