Busch-Jaeger Busch-free home flex Product Manual page 53

Slider value
Value sending elements (sliders) can be used to display values in different formats and to
■
send them to other devices.
Control element
Value sending element
(value slider)
Room temperature controller (basic version)
Air conditioners can be controlled with the control element for room temperature controllers.
Control element
RTC control element
(extension unit)
RGBW operation (basic version)
Specific settings can be made for corresponding lamps (LEDs, Philips Hue, etc.) with the
RGBW control elements. For example, the colours can be changed or the warm-white
component can be adjusted.
Control element
RGBW operation
Product manual 2CKA001473B5475
Status
Status
Status
Function
Value sending elements can be used to
display values in different formats and to send
them to other devices.
With "Value slider" the slider can be used to
change values. The changed values are then
sent.
Function
A room temperature control can be switched
via the control element (e.g. "Heating").
Setting options are called up by tapping. A
switch between the setting options can be
made by swiping to the left (temperature,
mode, etc.).
Function
The lamp is switched on or off with a press of
the control element.
The icon shows the brightness content and
the set colour. In line with the lamp types and
presets in the DCA, additional functions can
be called up (in the example via the arrow),
e.g. colour or white control.
The colour set last remains.
Additional settings can be made by tapping on
the three points in the top right area of the
control element.
Operation
│53