Table of Contents
Advertisement
Adjusting layout
In the display configuration you can adjust the layout of the individual operating pages of the
display. The layout determines how much space individual control elements can occupy. The
layout options of 1x1, 2x2, 1x2 and 2x2 are available.
Fig. 28:
Adjusting layout
Actuators/group selection
1. Select a room in the bar at the right edge of the screen.
–
The actuators and groups contained in the selected room are displayed in the list view.
The sequence is portrayed in the following by means of a room temperature controller.
Fig. 29:
Actuator/group selection
2. Select the room temperature controller by tapping on the points on the right side and pull the
control element of the room temperature controller into the working area on the surface of
the display.
Product manual 2CKA001473B5475
Commissioning via Busch-free@home®
│41
Advertisement
Table of Contents
