Table of Contents
Advertisement
4
Product Overview
Fig. 1:
Product overview
The displays are multifunctional room control displays for visualizing and operating building
functions in Busch-Installationsbus
The devices are available in frame-bound form and single displays (2.4" and 4.0").
■
The displays have a capacitive touchdisplay with a resolution of 240 x 240 points.
■
The control is connected with a haptic feedback (vibration) and signals specific operating
■
statuses to the user.
Up to 4 functions per page, up to a total of 12 functions on several pages.
■
The 2.4" displays can be combined with existing design lines (e.g. solo, future, axcent, etc.).
■
The displays are compatible with both bus systems of Busch-Installationsbus
free@home Bus. The signals are transmitted and the power for the device is supplied via the
Busch-Installationsbus
The device can also be used for the display of fault and alarm messages.
Configuration of free@home
Commissioning for free@home Twisted Pair is made via the free@home System Access Point.
Product manual 2CKA001473B5475
®
KNX and Busch-free@home
®
KNX or the free@home Bus. An additional power supply is required.
Product Overview
®
systems.
®
KNX and
│12
Advertisement
Table of Contents
