Combimag Dual Digital Power Flushing Filter And Heater - Kamco CF40 Operating And Servicing Manual

COMBIMAG DUAL DIGITAL POWER FLUSHING FILTER AND HEATER

Rather than having a single cylinder as per the standard
CombiMag, where the engineer only has the option to
use either the magnet or the heater, the dual unit has
two cylinders. This enables both the magnet and heater
to be used at the same time.
Specification
A dual stand with two cylinders:
First containing: Magnet: 11,000 gauss neodymium rare
earth magnet, sleeved in stainless steel.
Second containing: 3kw 240v digitally controlled
industrial immersion heater element complete with IP55
protective casing.
Supplied in a protective toolbox with hinged lid.
Issue: May 2023
Section F – Power Flushing Accessories
General operating instructions
For the magnetic filter section, follow the operating
instructions for the CombiMag filter detailed on Page F7.
The by-pass assembly has been designed to allow the
magnet cylinder to be isolated, whilst keeping the heater
cylinder constantly in the flushing circuit.
This allows the removal of the magnet for cleaning
without having to interrupt the flushing process.
It is important to always replace and use the magnet and
heater elements in the correct cylinder as labelled, for
safety and correct operation.
Page F.9