Table of Contents
Advertisement
COMBIMAG SOLO POWER FLUSHING FILTER
The CombiMag filter increases power flushing efficiency
by removing circulating black iron oxide contamination
from the system water. The filter is simply installed in line
between the heating system and the power flushing
pump.
The CombiMag controls the flow of water to give a high
residence time within the cylinder, to ensure that the
maximum amount of black iron oxide is extracted from
the water by the powerful magnet.
The design is such that even at maximum capacity, there
is always a clear passage for the circulating water.
The transparent cylinder enables progress of a power
flush to be visually monitored, and enables the engineer
to quickly check if the magnet requires cleaning.
The built-in bypass enables the magnet to be cleaned
without the need to temporarily stop the power flushing
process.
Issue: May 2023
Section F – Power Flushing Accessories
Benefits
Reduces dumping time by removing solids from the water
whilst circulating.
Collects circulating deposits that could lead to blockages
in restricted areas, and prevents them re-entering the
system.
Protects the boiler during power flush.
By-pass enables the magnet to be inspected without the
need to interrupt the power flush.
Reduces environmental contamination by collecting the
iron oxide and reducing the amount of water consumed.
Provides an impressive visual aid
to both the householder and the
engineer by showing the
quantity of sludge removed
from the system, and confirming
the need for a power flush.
Demonstrates why a permanently
installed magnetic filter will be
beneficial.
Wipe clean magnetic surface to
minimise cleaning time and effort.
Specification
Magnet: 11,000 gauss neodymium rare earth magnet,
sleeved in stainless steel.
Length of magnet:
400mm
Magnet surface area:
201 cm
Max. iron oxide capacity: 2.1 kg dry magnetite
Weight of unit:
4.95 kg
Overall height:
475mm
Overall width:
215mm
Overall depth:
245mm
2
Page F.6
Advertisement
Table of Contents
