Kubota WSM 05-E3B Series Workshop Manual page 92

05-E3B, 05-E3BG, WSM
Gear Case
1. Remove the fuel feed pump.
2. Remove the gear case.
(When reassembling)
• Grease thinly to the oil seal, and install it, ensuring the lip does
not come off.
(1) Gear Case
(A) Gear Case for Standard Oil Pan
(B) Gear Case for Extended Oil Pan
(C) Gear Case for BG Type
(Without D1305-E3BG)
S-37
DIESEL ENGINE
a : Bolt Length = 45 mm (1.8 in.)
b : Bolt Length = 50 mm (2.0 in.)
c : Bolt Length = 55 mm (2.2 in.)
d : Bolt Length = 65 mm (2.6 in.)
e : Bolt Length = 68 mm (2.7 in.)
f : Bolt Length = 70 mm (2.8 in.)
g : Bolt Length = 85 mm (3.3 in.)
h : Nut
j : Bolt Length = 59 mm (2.3 in.)
k : Bolt Length = 82 mm (3.2 in.)
W1030917
KiSC issued 12, 2007 A