Kubota WSM 05-E3B Series Workshop Manual page 88

05-E3B, 05-E3BG, WSM
Rocker Arm and Push Rod
1. Remove the rocker arm bracket screws / nuts.
2. Detach the rocker arm assembly (1).
3. Remove the push rods (2).
(When reassembling)
• When putting the push rods (2) onto the tappets (3), check to see
if their ends are properly engaged with the dimples.
IMPORTANT
• After installing the rocker arm, be sure to adjust the valve
clearance.
[D1005-E3B / E3BG, D1105-E3B / E3BG, D1105-T-E3B,
V1505-E3B / E3BG, V1505-T-E3B]
Tightening torque Rocker arm bracket nut
[D1305-E3B / E3BG]
Rocker arm bracket
Tightening torque
screw
(1) Rocker Arm Assembly
(2) Push Rod
(3) Tappet
S-33
DIESEL ENGINE
22 to 26 N·m
2.2 to 2.7 kgf·m
16 to 19 lbf·ft
22 to 26 N·m
2.2 to 2.7 kgf·m
16 to 19 lbf·ft
[A] D1005-E3B / E3BG,
D1105-E3B / E3BG, D1105-T-E3B,
V1505-E3B / E3BG, V1505-T-E3B
[B] D1305-E3B / E3BG
W1021437
KiSC issued 12, 2007 A