Troubleshooting Guide - FLORABEST 76160 Operation And Safety Notes Original Operating Instructions

10. Troubleshooting guide

Fault
The equipment does
not start.
The equipment starts
but does not deve-
lop its full power.
The engine does not
run smoothly.
Engine smokes ex-
cessively.
Anleitung_3436062_LB3.indb 14 Anleitung_3436062_LB3.indb 14
GB/IE
Possible cause
- Correct starting procedure not follo-
wed.
- Sooted or damp spark plug.
- Incorrect carburetor setting.
- Incorrect choke lever setting.
- Soiled air fi lter.
- Incorrect carburetor setting.
- Incorrect electrode gap on the
spark plug.
- Incorrect carburetor setting.
- Incorrect fuel mix.
- Incorrect carburetor setting.
- 14 -
Remedy
- Follow the instructions for starting.
- Clean the spark plug or replace it
with a new one (see section 8.2).
- Contact an authorized customer
service outlet or send the equipment
to ISC GmbH.
- Set the choke lever (Fig. 1/Item 7)
to " ".
- Clean the air fi lter (see section 8.2).
- Contact an authorized customer
service outlet or send the equipment
to ISC GmbH.
- Clean the spark plug and adjust the
electrode gap, or fi t a new spark
plug (see section 8.2).
- Contact an authorized customer
service outlet or send the equipment
to ISC GmbH.
- Use the correct fuel mix (see the fuel
mixing table).
- Contact an authorized customer
service outlet or send the equipment
to ISC GmbH.
01.06.12 12:53 01.06.12 12:53