Table of Contents
Advertisement
The Tape Player
DISC MODE
by specifying
the tape length
You can automatically edit and record
daAejg
adey
ayy
|
the tracks you want from all the CDs on
the disc trays by specifying the tape
length.
When the total playing time for one side
exceeds the specified tape length, the
remaining tracks are recorded on the
reverse side of the tape.
Tips
1 Insert a cassette into the deck B.
* You can use the tape
whose total tape length
2 Press one of the DISC SELECT 1 to 6 buttons to
is up to 99 minutes.
select the disc tray and insert a CD. To insert more
* You can edit the CD
CDs, repeat this step. Then, press ff on the CD
having 16 tracks or
section.
fewer.
3 Press DISC MODE to select "ALL DISCS."
4 Press EDIT.
"EDIT" appears in the display.
agit
:
5 Press K€ /PP1 AMS/SEARCH until the total
iaebee dutenas aii
tape length appear in the display, and press
operations explained
on pages 21 and 22 by
ENTER/MEM.
using the remote
control. If you try to do,
malfunction may occur.
In that case, unplug the
AC power cord and
pe all ne et
6 Press one of the DISC SELECT 1 to 6 buttons to
'or memory
back-up.
After all the indications
select S:
in the display
disappear, plug the
continued
power cord, insert the
batteries, and then use
the player again.
The Tape Plyaer | 21
Advertisement
Table of Contents
