Sony CFD-676 Operating Instructions Manual page 22

ee
Recording the tracks you want by specifying the tape length
(continued)
Notes 7 Press kd / Pt AMS/SEARCH to select the track
c fase nar ~~ you want, and press ENTER/MEM.
more, you cannot select To select more tracks repeat this step.
the tracks. Select
another CD. Selected tracks appear
* Do not open the disc in the music calender.
tray while If the playing time of
programming. The the selected track ;
track order exceeds the total tape eras
ne will be length, the track Recording order
selected last does not Selected track
if you made a mistake, press CANCEL and start
step 7 from the beginning.
To select additional track from another disc,
repeat step 6 and 7.
8 Press @ REC.
Recording of the side A starts. ._.,
When the recording of the side A-is finished, the
player is set to the pause mode and the tape runs
to the end of your side (any previous recording
will be erased). Take out the cassette and reverse
the recording side. Reinsert the cassette and press
@ REC on the deck B. Recording of the side B
starts.
To erase a recording
1 Insert a cassette whose recording you want to erase.
(Do not insert a cassette into the deck A.)
2 Disconnect the microphone if connected at the MIX
MIC jack.
3 Turn on the power and the press FUNCTION until
"TAPE" appears in the display window.
4 Press @ REC.
22 | The Tape Player