Table of Contents
Advertisement
014
SONY/GENERAL
AUDIO
04/30/97
WED
13:58
FAX
201
930
7982
General
26 | Additional Information
Troubleshooting
Symptom
Remedy
The power is not on.
e Connect the AC power cord to a wall outlet
securely.
© Make sure the batteries are inserted correctly.
* You cannot turn on the player with the remote
when you operate the player on batteries.
o Make sure the function you want to use appears
in the display window.
e Adjust the volume.
» Unplug the headphones when listening through
speakers.
when a CDis in place.
The CD does not play.
There is no audio.
o Make sure that the CD compartment
is closed.
o Place the CD with the label surface up.
'
e Clean
the CD.
'
e Take out the CD and leave the CD compartment
open for about an hour to dry moisture
CD
Player
The sound drops out.
o Reduce the volume,
e Clean
the CD, or replace it if the CD is badly
damaged
e Place the player in a location free from
.
vibration.
The audio is weak or has poor
« Replace all the batteries with new ones if they
quality.
are weak.
e Move the player away from the TV.
« Ifyou are using the remote while listening to
AM or LW radio, noise may be heard. This is
unavoidable.
© If you are listening to an FM program near the
TV with an indoor antenna, move the player
away from the TV.
:
Radio
The picture of your TV becomes
unstable.
Pree ee
V E
Er 7777777
Symptom
Remedy
The tape does not move when you
* Close the cassette compartment securely.
press an operation button.
The REC © button does not
a Make sure the safety tab on the cassette is in
function/The tape does not play.
place.
e Make sure "TAPE" appears in the display.
The tape does not erase completely.
® Clean the erasing head (see page 28.)
* Replace all the batteries with new ones if they
5
are weak,
=
The tape does not record.
e Make sure the tape is inserted properly.
2
e Make sure the safety tab of the cassette is in
e
place.
The audio is weak/The audlo
® Clean the heads, pinch roller and capstan (see
quality
is poor. .
page 28),
© Demagnetize the heads using a demagnetizer
(see
page 28).
The sound is distorted.
* The TYPE II (high position) or TYPE IV (metal
tape is being used. Use TYPE I (normal) tape
* Make sure the time on the clock is correct,
© Check to see if the AC power had been cut off.
o Make sure the O (clock) indication is displaye
+ Replace all the batteries in the remote with ne'
ones if they are weak.
e Make sure that you are pointing the remote at
the remote sensor on the player.
© Remove any obstacles in the path of the remot
and the player.
o Make sure the remote sensor is not exposed to
strong light such as direct sunlight or
fluorescent lamp light.
e Move closer to the player when using the
remote,
The timer does not operate.
mer
The remote does not function.
Remote
(CFD-S33
only)
The player uses a built-in micro computer for its various operations. Due to ic, power
supp! Fe
etc.,
operation may sometimes become unstable. After trying the above
remedies,
if the player still does not function properly,
RESET in the battery compartmer
with a pointed material. If the problem persists, please consult your nearest Sony dealer,
Additional Informati
Advertisement
Table of Contents
