Enter/Exit From Standby; Sample Collection And Handling - scil Element HT5+ User Manual

NOTE:
The default username is "user" and the password is "User".
•
•
If the software cannot be started successfully after being launched for several times,
contact the technical support department or the authorized distributor.
5. Tap to enter the system.
NOTE:
•
The system opens functions for the user according to the user level. The user level
depends on the username and password when the user logs in.
•
If user switching is necessary, tap MENU > LOGOUT. Enter the desired username and
the password into the pop-up dialog box and click OK button to login.

5.4 Enter/exit from standby

When the analyzer is free from fluidic operations or when it reaches the set standby time, the
analyzer automatically enters the standby status.
When the user starts sample tests or performs any operation that initiates fluidic system actions
or moving parts actions, the analyzer automatically exits standby.

5.5 Sample collection and handling

NOTE:
Make sure the probe tip does not contact the sample tube to avoid potential spillage.
Vers.: 20230710ENG
Page 31