Before First Use; Preparing For Use; Using The Appliance - T-Fal EY501 Manual

D
G
F
E
C
A
B
4
DESCRIPTION
A. Bowl
B. Bowl handle
C. Removable die-cast grill grid
D. Temperature control knob (80-200°C /
176°F-392°F)

BEFORE FIRST USE

1. Remove all packaging material.
2. Remove any stickers or labels from the appliance.
3. Do not remove silicon pads of the grid.
4. Thoroughly clean the bowl and the removable grid with hot water, some washing-up liquid
and a non-abrasive sponge.
Note: You cannot clean these parts in the dishwasher.
5. Wipe the inside and outside of the appliance with a damp cloth. The appliance works by
producing hot air. Do not fill the bowl (A) with oil or frying fat.

PREPARING FOR USE

1. Place the appliance on a flat, stable, heat-resistant work surface away from water splashes.
2. Do not fill the bowl with oil or any other liquid.
Do not put anything on top of the appliance. This disrupts the airflow and affects the
hot air frying result.

USING THE APPLIANCE

Easy Fry can cook a large range of recipes. Cooking times for the main foods are given in the
section 'Cooking Guide'.
1. Connect the power supply cord to an electrical socket.
2. Carefully pull the bowl out of the appliance.
3. Place the food in the bowl.
Note: Never fill the bowl beyond the MAX level mark or exceed the maximum amount
indicated in the table (see into section 'Cooking Guide'), as this could affect the quality
of the end result.
4. Slide the bowl back into the appliance.
Caution: Do not touch the bowl during use and for some time after use, as it gets very
hot. Only hold the bowl by the handle.
5. Move the temperature control knob to the required temperature. See section 'Cooking
Guide' to select the right temperature
6. Select the required cooking time (see section 'Cooking Guide').
7. To switch on the appliance, turn the timer knob to the required cooking time.
Add 3 minutes to the cooking time stated in the tables on pages 7 and 8 when using
the appliance from cold.
To set a short time, turn the timer knob until 10 minutes and then go back to the
desired time.
E. Power on/off and timer (0-60 min) knob
with auto shut-off
F. Power indicator light
G. Heating-up light
5
EN