Table of Contents
Advertisement
FEATURES
SPARK PLUG WRENCH
The spark plug wrench secures to the spare drive belt container on the front
bumper. Remove the container to add or access a spare spark plug or belt.
REPLACEMENT DRIVE BELT
A replacement drive belt can be stored in the spare drive belt container
located under the hood.
QUICKDRIVE
The QUICKDRIVE drive system utilizes a drive belt that exhibits extraordinary
performance and service life when the belt is handled properly before and during
installation. Improper handling of this belt can result in a shortened service life.
Inspect and change the belt at the intervals outlined in the Maintenance chapter.
Special tools are required to remove and install the QUICKDRIVE belt. Your
authorized POLARIS dealer can assist with this service.
BELT HANDLING
• Store a new belt in original packaging. Remove only when ready for
installation.
• Avoid belt contact with solvents, oils or chemical cleaners.
• Do not crimp or bend the belt to a diameter less than the upper sprocket.
• Do not back-bend the belt.
• Do not twist or flip the belt.
• Do not use a pry bar or screwdriver to remove or install the belt.
• Always break in a new belt properly. See page 119 for belt break-in
procedures.
CARGO STORAGE
Never hang heavy items or fuel
containers from the rear of the tunnel.
Cargo may be stowed only in the tunnel
storage bag (if equipped) or under the
seat.
The maximum weight capacity for the
tunnel is 15 lb (7 kg). Include the weight
of the cargo bag when determining
cargo weight.
Exceeding the tunnel cargo weight capacity could result in tunnel and or
suspension pad damage. Do not exceed the weight limit.
38
NOTICE
q
Advertisement
Table of Contents
