Table of Contents
Advertisement
THE PERFECT FIT
THROTTLE BLOCK COVER
Adjusting the throttle block cover
screws is not required to align
the position of the throttle block.
Removing the cover screws
should only be necessary if
replacing or removing the
throttle block from the handlebar
assembly. See your authorized
Polaris dealer or certified
technician for throttle
replacement information.
PERC BUTTON ALIGNMENT
1. Loosen the mounting screw
u
.
2. Move the PERC button to the
desired position.
3. Torque screw to
specification. Do not
over-torque.
ENGINE STOP SWITCH ALIGNMENT
The stop switch must be positioned in an easily accessible location.
104
TORQUE
Throttle Block Cover Screws
6 in-lbs (0.7 N·m)
TORQUE
PERC Button Mounting Screw
35 in-lbs (4 N·m)
CAUTION
Advertisement
Table of Contents
