Table of Contents
Advertisement
Camera
Description
Camera
Intel RealSense 3D camera 1080p
HP Wide Vision HD camera 720p
3D camera cable
Microphone board, for products with a 3D camera
IMPORTANT:
and replacement.
Before removing the camera, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the base enclosure (see
5.
Disconnect the battery (see
a.
Display assembly (see
b.
Display bezel (see
Remove the camera:
1.
If it is necessary to replace to remove the camera board, lift the camera board (1), and then disconnect
the camera cable (2) from the camera board.
Make special note of each screw and screw lock size and location during removal
Base enclosure on page
Battery on page
Display assembly on page
Display panel on page
32).
34), and then remove the following components:
37).
60).
Component replacement procedures
Spare part number
781624-005
846006-003
859445-001
857471-001
65
Advertisement
Table of Contents
