Error Massage Of Stabilizer Adjustment -- E3-19; Error Massage Of Spot Noise Adjustment: E3-19 - Hitachi DIGITAL 8 VM-D965LE Service Manual

8.4 Error Message of Stabilizer Adjustment
ERROR MESSAGE
THIS MODEL NEED NOT BE ADJUSTED
PRESS ANY KEY.
- Adjustment is to be started for models that do not need adjustment.
- Model selection Is incorrect.
- Initial setting for each model is incorrect.
- Make sure of model selection and initial setting for each model.
If they are incorrect, readjust all adjustment items.)
- Adjustment Is to be started for models that do not need adjustment
(or adjustment is inappropriate).
- Model selection is incorrect.
- Initial setting for each model is incorrect.
- Make sure of model selection and initial setting for each model.
lf they are incorrect, readjust all adjustment items.
INVALID MODEL
PRESS ANY KEY
8.5 Error Message of Spot Noise Adjustment
ERROR MESSAGE COUNTERMEASURE
ERROR!! - Spot noise compensation is inhibited by the data in the
SPOT NOISE COMPENSATION IS EEPROM.
STOPPED BY INITIAL DATA. - Turn the power on again.
PLEASE CHECK THE EEPROM. - Data in the EEPROM is defective. (initialize it.)
PRESS ANY KEY.
- Check the EEPROM,and if necessary,
replace it.
ERROR!! - Turn the power on again.
- The amount of spot noise that can be compensated reaches the
limit.
- Turn the power on again.
- Check the CCD image sensor,and if necessary,replace it.
E3-19