Electrical Connection - KNF N838 DC Series Translation Of Original Operating And Installation Instructions

Diaphragm pump N838_DC
Translation of Original Operating and Installation Instruction, KNF 347395-347606
09/23
WARNING
CAUTION

6.2 Electrical connection

DANGER
à
When connecting to a power source, observe the applica-
ble standards, regulations, directives, and technical stan-
dards.
à
Install a device for separating the pump motor from the
electrical grid in the electrical installation (e.g. in accor-
dance with EN 60335-1).
Risk of injury during operation
à
Take protective measures against
touching the electrically live parts
(electrical connection, drive wind-
ings if applicable).
à
Take protective measures to safe-
guard against touching moving and
hot parts.
à
Automatic restart after tripping of
the self-resetting protection tem-
perature limiter.
Risk of pump damage during operation
à
Take protective measures against
the penetration of foreign bodies
into the pump.
Danger to life from electric shock
à
Only have the pump connected by
an authorized specialist.
à
Only have the pump connected if
the power supply is disconnected.
Installation and connection
21