About This Document; Using The Operating And Installation Instructions; Exclusion Of Liability - KNF N838 DC Series Translation Of Original Operating And Installation Instructions

Diaphragm pump N838_DC
Project pumps For customer-specific project pumps (pump models that begin
Optional con-
tents
Translation of Original Operating and Installation Instruction, KNF 347395-347606
09/23

1 About this document

1.1 Using the operating and installation
instructions
The operating and installation instructions are part of the
pump.
à
In the event of uncertainties with regard to the content of
the operating and installation instructions, please contact
the manufacturer (contact data: see www.knf.com).
Please have the type and serial number of the pump
ready.
à
Read the operating and installation instructions before you
commission the pump.
à
Give the operating and installation instructions only com-
pletely and unchanged to the next owner.
à
Keep the operating and installation instructions within
reach at all times.
with "PJ" or "PM"), there may be deviations from these oper-
ating and installation instructions.
à
For project pumps, also observe the agreed specifica-
tions.
Project-specific options may be included in the operating and
assembly instructions. These are marked with "Optional". It is
also possible that project-specific deviations are not included
in the operating and assembly instructions.

1.2 Exclusion of liability

The manufacturer assumes no liability for damages and mal-
functions resulting from failure to observe the operating and
installation instructions.
The manufacturer assumes no liability for damages and mal-
functions resulting from changes or modifications to the de-
vice and improper handling.
The manufacturer assumes no liability for damages and mal-
functions resulting from impermissible spare parts and acces-
sories.
About this document
3