Cisco Aironet 1540 Series Hardware Installation Manual page 34

Mounting the Access Point
Figure 2-5 Pivoting Mounting Bracket
1
1
One of four bolt holes for fastening to the
back of the AP.
This is the AP-plate end of the bracket, and is
fastened to the back of the AP.
2
Wall-plate end of the bracket. This plate is
fastened to the wall.
Figure 2-6 Pivoting Mounting Bracket Dimensions
17.10
.67
SLOT LENGTH
Cisco Aironet 1540 Series Outdoor Access Point Hardware Installation Guide
2-14
2
3
Screw holes for wall mounting.
These screw holes can also be used as slots for
steel band clamps in pole-mount installations.
100
3.94
[4.0]
.16
SLOT WIDTH
Chapter 2
3
4X 6.5MM THRU
2x M8 THRU
56
2.20
28
1.10
Installing the Access Point