Honda BFP8D Owner's Manual page 79

ENGINE OIL DRAIN SCREW
2. Remove the oil filler cap, and place
a suitable container below the drain
screw hole to catch the used oil,
then remove the engine oil drain
screw.
3. Allow the used oil to drain
completely, then reinstall the
engine oil drain screw, and tighten
it securely.
OIL DRAIN SCREW TORQUE:
4.4 lbf·ft (6 N·m , 0.6 kgf·m)
SERVICING YOUR OUTBOARD MOTOR
Inspect the sealing O-ring and
replace if damaged or torn.
Improper disposal of engine oil can
be harmful to the environment. If
you change your own oil, please
dispose of the used oil properly. Put
it in a sealed container, and take it
to a recycling center. Do not
discard it in a trash bin, dump it on
the ground, or pour it down a
drain.
4. With the outboard motor in a
vertical position, fill to the upper
limit mark on the dipstick (p. 75)
with the recommended oil.
Engine oil refill capacity:
Without oil filter change:
1.1 US qt (1.0 L)
With oil filter change:
1.2 US qt (1.1 L)
5. Install the oil filler cap and tighten
it securely.
6. Install and lock the engine cover.
77